<?xml version='1.0' encoding='utf-8'?>

<!DOCTYPE rfc [
  <!ENTITY nbsp    "&#160;">
  <!ENTITY zwsp   "&#8203;">
  <!ENTITY nbhy   "&#8209;">
  <!ENTITY wj     "&#8288;">
]>

<rfc xmlns:xi="http://www.w3.org/2001/XInclude" ipr="trust200902" docName="draft-ietf-tls-rfc8447bis-15" category="std" consensus="true" submissionType="IETF" number="9847" updates="8447" tocInclude="true" sortRefs="true" symRefs="true" version="3">

  <front>
    <title abbrev="TLS and DTLS IANA Registry Updates">IANA Registry Updates for TLS and DTLS</title>
    <seriesInfo name="RFC" value="9847"/>
    <author initials="J." surname="Salowey" fullname="Joe Salowey">
      <organization>CyberArk</organization>
      <address>
        <email>joe@salowey.net</email>
      </address>
    </author>
    <author initials="S." surname="Turner" fullname="Sean Turner">
      <organization>sn3rd</organization>
      <address>
        <email>sean@sn3rd.com</email>
      </address>
    </author>
    <date year="2025" month="December"/>
    <area>SEC</area>
    <workgroup>TLS</workgroup>
    <abstract>

<t>This document updates the changes to the TLS and DTLS IANA registries
made in RFC 8447. It adds a new value, "D" for discouraged,
to the "Recommended" column of the selected TLS registries and
adds a "Comment" column to all active registries that do not
already have a "Comment" column. Finally, it updates the
registration request instructions.</t>
      <t>This document updates RFC 8447.</t>
    </abstract>
  </front>
  <middle>

<section anchor="introduction">
      <name>Introduction</name>
      <t>This document instructs IANA to make changes to a number of the IANA
registries related to Transport Layer Security (TLS) and Datagram
Transport Layer Security (DTLS). These changes update the changes made
in <xref target="RFC8447"/>.</t>
      <t>This specification adds a new value, "D" for discouraged, to the "Recommended"
column of the selected TLS registries and adds a "Comment" column to all
active registries that do not already have a "Comment" column.</t>
      <t>This specification also updates the registration request instructions.</t>
    </section>
    <section anchor="terminology">
      <name>Terminology</name>
      <t>The key words "<bcp14>MUST</bcp14>", "<bcp14>MUST NOT</bcp14>", "<bcp14>REQUIRED</bcp14>", "<bcp14>SHALL</bcp14>", "<bcp14>SHALL
NOT</bcp14>", "<bcp14>SHOULD</bcp14>", "<bcp14>SHOULD NOT</bcp14>", "<bcp14>RECOMMENDED</bcp14>", "<bcp14>NOT RECOMMENDED</bcp14>",
"<bcp14>MAY</bcp14>", and "<bcp14>OPTIONAL</bcp14>" in this document are to be interpreted as
described in BCP 14 <xref target="RFC2119"/> <xref target="RFC8174"/> when, and only when, they
appear in all capitals, as shown here.</t>

</section>
    <section anchor="updating-recommended-columns-values">
      <name>Updating "Recommended" Column's Values</name>
      <t>The instructions in this document update the "Recommended" column,
originally added in <xref target="RFC8447"/> to add a third value, "D",
indicating that a value is discouraged. The permitted values
of the "Recommended" column are:</t>
      <dl>
        <dt>Y:</dt>
        <dd>
          <t>Indicates that the IETF has consensus that the
  item is <bcp14>RECOMMENDED</bcp14>. This only means that the associated
  mechanism is fit for the purpose for which it was defined.
  Careful reading of the documentation for the mechanism is
  necessary to understand the applicability of that mechanism.
  The IETF could recommend mechanisms that have limited
  applicability but will provide applicability statements that
  describe any limitations of the mechanism or necessary constraints
  on its use.</t>
        </dd>
        <dt>N:</dt>
        <dd>
          <t>Indicates that the item has not been evaluated by
  the IETF and that the IETF has made no statement about the
  suitability of the associated mechanism. This does not necessarily
  mean that the mechanism is flawed, only that no consensus exists.
  The IETF might have consensus to leave an item marked as "N" on
  the basis of the item having limited applicability or usage constraints.</t>
        </dd>
        <dt>D:</dt>
        <dd>
          <t>Indicates that the item is discouraged. This marking could be used to identify
  mechanisms that might result in problems if they are used, such as
  a weak cryptographic algorithm or a mechanism that might cause
  interoperability problems in deployment. When marking a registry entry as
  "D", either the "Reference" or the "Comment" column <bcp14>MUST</bcp14> include sufficient
  information to determine why the marking has been applied. Implementers and
  users <bcp14>SHOULD</bcp14> consult the linked references associated with the item to
  determine the conditions under which the item <bcp14>SHOULD NOT</bcp14> or <bcp14>MUST NOT</bcp14> be used.</t>
        </dd>
      </dl>
      <t>Setting a value to "Y" or "D" or transitioning the value from "Y" or "D" in the "Recommended" column requires
IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>. Not all items defined
in Standards Track RFCs need to be set
to "Y" or "D". Any item not otherwise specified is set to "N". The column is
blank for values that are unassigned or reserved unless specifically set.</t>
      <section anchor="rec-note">
        <name>Recommended Note</name>
        <t>Existing registries have a note on the meaning of the "Recommended" column. For the
registries discussed in the subsequent sections, this note is updated
with a sentence describing the "D" value as follows:</t>
        <blockquote>
          <t>Note: If the "Recommended" column is set to "N", it does not necessarily mean
that it is flawed; rather, it indicates that the item has not
been through the IETF consensus process, has limited applicability, or
is intended only for specific use cases.  If the "Recommended" column
is set to "D", the item is discouraged and <bcp14>SHOULD NOT</bcp14> or <bcp14>MUST NOT</bcp14> be used,
depending upon the situation; consult the item's references for clarity.</t>
        </blockquote>
      </section>
    </section>
    <section anchor="tls-extensiontype-values-registry">
      <name>TLS ExtensionType Values Registry</name>
      <t>In order to reflect the changes in the "Recommended" column allocation,
IANA has updated the "TLS ExtensionType Values" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Adjusted the registration procedure related to setting the "Recommended" column as follows:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D" in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Updated the "Recommended" column with the changes listed below.  Entries
keep their existing "Y" and "N" entries except for the entries in the following table.
IANA has added a reference to this document for these entries.</t>
        </li>
      </ul>
      <table>
        <thead>
          <tr>
            <th align="left">Value</th>
            <th align="left">Extension Name</th>
            <th align="right">Recommended</th>
          </tr>
        </thead>
        <tbody>
          <tr>
            <td align="left">4</td>
            <td align="left">truncated_hmac</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">40</td>
            <td align="left">Reserved</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">46</td>
            <td align="left">Reserved</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">53</td>
            <td align="left">connection_id (deprecated)</td>
            <td align="right">D</td>
          </tr>
        </tbody>
      </table>
      <ul spacing="normal">
        <li>
          <t>Updated the note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
        <li>
          <t>For the truncated_hmac, added the following link to the "Reference" column: <eref target="https://www.iacr.org/archive/asiacrypt2011/70730368/70730368.pdf"/>.</t>
        </li>
        <li>
          <t>For the two Reserved values above, added the following link in the "Reference" column: <eref target="https://mailarchive.ietf.org/arch/msg/tls-reg-review/5BD62HBFjo_AsW-Y8ohVuWEe1gI/"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-cipher-suites-registry">
      <name>TLS Cipher Suites Registry</name>
      <t>Several categories of cipher suites are discouraged for general use and
are marked as "D".</t>
      <t>Cipher suites that use NULL encryption do not provide the confidentiality
normally expected of TLS. Protocols and applications are often designed
to require confidentiality as a security property. These
cipher suites <bcp14>MUST NOT</bcp14> be used in those cases.</t>
      <t>Cipher suites marked as EXPORT use weak ciphers and were deprecated in
TLS 1.1 <xref target="RFC4346"/>.</t>
      <t>Cipher suites marked as anon do not provide any authentication, are
vulnerable to on-path attacks, and were deprecated in TLS 1.1
<xref target="RFC4346"/>.</t>
      <t>RC4 is a weak cipher and is deprecated in <xref target="RFC7465"/>.</t>
      <t>DES and the International Data Encryption Algorithm (IDEA) are not considered secure for general use and were deprecated in <xref target="RFC5469"/>. MD5 and SHA-1 are also not secure for general use and were deprecated in <xref target="RFC9155"/>.</t>
      <t>In order to reflect the changes in the "Recommended" column allocation,
IANA has updated the "TLS Cipher Suites" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Adjusted the registration procedure related to setting the "Recommended" column as follows:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D" in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Updated the "Recommended" column with the changes listed below.  Entries
keep their existing "Y" and "N" entries except for the entries in following table.
IANA has added a reference to this document for these entries. This document does not
make any changes to the "DTLS-OK" column.</t>
        </li>
      </ul>
      <table>
        <thead>
          <tr>
            <th align="left">Value</th>
            <th align="left">Description</th>
            <th align="right">Recommended</th>
          </tr>
        </thead>
        <tbody>
          <tr>
            <td align="left">0x00,0x1E</td>
            <td align="left">TLS_KRB5_WITH_DES_CBC_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x20</td>
            <td align="left">TLS_KRB5_WITH_RC4_128_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x21</td>
            <td align="left">TLS_KRB5_WITH_IDEA_CBC_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x22</td>
            <td align="left">TLS_KRB5_WITH_DES_CBC_MD5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x24</td>
            <td align="left">TLS_KRB5_WITH_RC4_128_MD5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x25</td>
            <td align="left">TLS_KRB5_WITH_IDEA_CBC_MD5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x26</td>
            <td align="left">TLS_KRB5_EXPORT_WITH_DES_CBC_40_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x27</td>
            <td align="left">TLS_KRB5_EXPORT_WITH_RC2_CBC_40_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x28</td>
            <td align="left">TLS_KRB5_EXPORT_WITH_RC4_40_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x29</td>
            <td align="left">TLS_KRB5_EXPORT_WITH_DES_CBC_40_MD5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x2A</td>
            <td align="left">TLS_KRB5_EXPORT_WITH_RC2_CBC_40_MD5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x2B</td>
            <td align="left">TLS_KRB5_EXPORT_WITH_RC4_40_MD5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x2C</td>
            <td align="left">TLS_PSK_WITH_NULL_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0x8A</td>
            <td align="left">TLS_PSK_WITH_RC4_128_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0xB0</td>
            <td align="left">TLS_PSK_WITH_NULL_SHA256</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0x00,0xB1</td>
            <td align="left">TLS_PSK_WITH_NULL_SHA384</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x06</td>
            <td align="left">TLS_ECDHE_ECDSA_WITH_NULL_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x07</td>
            <td align="left">TLS_ECDHE_ECDSA_WITH_RC4_128_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x10</td>
            <td align="left">TLS_ECDHE_RSA_WITH_NULL_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x11</td>
            <td align="left">TLS_ECDHE_RSA_WITH_RC4_128_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x33</td>
            <td align="left">TLS_ECDHE_PSK_WITH_RC4_128_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x39</td>
            <td align="left">TLS_ECDHE_PSK_WITH_NULL_SHA</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x3A</td>
            <td align="left">TLS_ECDHE_PSK_WITH_NULL_SHA256</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0x3B</td>
            <td align="left">TLS_ECDHE_PSK_WITH_NULL_SHA384</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0xB4</td>
            <td align="left">TLS_SHA256_SHA256</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">0xC0,0xB5</td>
            <td align="left">TLS_SHA384_SHA384</td>
            <td align="right">D</td>
          </tr>
        </tbody>
      </table>
      <ul spacing="normal">
        <li>
          <t>Updated the note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-supported-groups-registry">
      <name>TLS Supported Groups Registry</name>
      <t>In order to reflect the changes in the "Recommended" column allocation,
IANA has updated the "TLS Supported Groups" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Updated the registration policy to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D" in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Updated the "Recommended" column with the changes listed below.  Entries
keep their existing "Y" and "N" entries except for the entries in following table.
IANA has added a reference to this document for these entries.</t>
        </li>
      </ul>
      <table>
        <thead>
          <tr>
            <th align="left">Value</th>
            <th align="left">Description</th>
            <th align="right">Recommended</th>
          </tr>
        </thead>
        <tbody>
          <tr>
            <td align="left">1</td>
            <td align="left">sect163k1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">2</td>
            <td align="left">sect163r1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">3</td>
            <td align="left">sect163r2</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">4</td>
            <td align="left">sect193r1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">5</td>
            <td align="left">sect193r2</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">6</td>
            <td align="left">sect233k1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">7</td>
            <td align="left">sect233r1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">8</td>
            <td align="left">sect239k1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">15</td>
            <td align="left">secp160k1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">16</td>
            <td align="left">secp160r1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">17</td>
            <td align="left">secp160r2</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">18</td>
            <td align="left">secp192k1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">19</td>
            <td align="left">secp192r1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">20</td>
            <td align="left">secp224k1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">21</td>
            <td align="left">secp224r1</td>
            <td align="right">D</td>
          </tr>
        </tbody>
      </table>
      <ul spacing="normal">
        <li>
          <t>Updated the note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
        <li>
          <t>Removed the "Elliptic curve groups" note from the registration
procedures table.</t>
        </li>
        <li>
          <t>For each of the entries above, added the following link to the
"Comment" column: <eref target="https://datatracker.ietf.org/meeting/118/materials/slides-118-tls-rfc8447bis-00"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-exporter-labels-registry">
      <name>TLS Exporter Labels Registry</name>
      <t>This document updates the registration procedure for the "TLS Exporter
Labels" registry and updates the "Recommended" column allocation.
IANA has updated the "TLS Exporter Labels" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Changed the registration procedure from Specification Required to
Expert Review and updated it to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D" in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Entries kept their existing "Recommended" column "Y" and "N" entries.</t>
        </li>
        <li>
          <t>Updated the note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
        <li>
          <t>Updated the note on the role of the expert reviewer as follows.</t>
        </li>
      </ul>
      <blockquote>
        <t>Note: The role of the designated expert is described in <xref section="17" sectionFormat="of" target="RFC8447"/>.
Even though this registry does not require a specification, the
designated expert <xref target="RFC8126"/> will strongly encourage registrants
to provide a link to a publicly available specification. An
Internet-Draft (that is posted and never published as an RFC)
or a document from another standards body, industry consortium,
university site, etc. is suitable for these purposes.
The expert may provide more in-depth reviews, but their approval
should not be taken as an endorsement of the exporter label.  The
expert also verifies that the label is a string consisting of
printable ASCII characters beginning with "EXPORTER".  IANA <bcp14>MUST</bcp14>
also verify that one label is not a prefix of any other label.
For example, labels "key" or "master secretary" are forbidden.</t>
      </blockquote>
      <ul spacing="normal">
        <li>
          <t>Renamed the "Note" column to "Comment".</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-certificate-types-registry">
      <name>TLS Certificate Types Registry</name>
      <t>In order to reflect the changes in the "Recommended" column allocation,
IANA has updated the "TLS Certificate Types" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Adjusted the registration procedure related to setting the "Recommended" column as follows:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D" in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Entries kept their existing "Recommended" column "Y" and "N" entries.</t>
        </li>
        <li>
          <t>Updated the note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-hashalgorithm-registry">
      <name>TLS HashAlgorithm Registry</name>
      <t>TLS 1.0 and TLS 1.1 were deprecated <xref target="RFC8996"/>; TLS 1.2 will
be in use for some time. In order to reflect the changes in the "Recommended"
column allocation, IANA has updated the "TLS HashAlgorithm" registry
as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Updated the registration procedure to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D"  in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Updated the "TLS HashAlgorithm" registry to add a "Recommended" column
as follows:</t>
        </li>
      </ul>
      <table>
        <thead>
          <tr>
            <th align="left">Value</th>
            <th align="left">Description</th>
            <th align="right">Recommended</th>
          </tr>
        </thead>
        <tbody>
          <tr>
            <td align="left">0</td>
            <td align="left">none</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">1</td>
            <td align="left">md5</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">2</td>
            <td align="left">sha1</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">3</td>
            <td align="left">sha224</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">4</td>
            <td align="left">sha256</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">5</td>
            <td align="left">sha384</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">6</td>
            <td align="left">sha512</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">8</td>
            <td align="left">Intrinsic</td>
            <td align="right">Y</td>
          </tr>
        </tbody>
      </table>
      <ul spacing="normal">
        <li>
          <t>Added a note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-signaturealgorithm-registry">
      <name>TLS SignatureAlgorithm Registry</name>
      <t>TLS 1.0 and TLS 1.1 were deprecated <xref target="RFC8996"/>, TLS 1.2 will
be in use for some time. In order to reflect the changes in the "Recommended"
column allocation, IANA has updated the "TLS SignatureAlgorithm" registry
as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Updated the registration procedure to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D"  in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Updated the "TLS SignatureAlgorithm" registry to add a "Recommended"
column as follows:</t>
        </li>
      </ul>
      <table>
        <thead>
          <tr>
            <th align="left">Value</th>
            <th align="left">Description</th>
            <th align="right">Recommended</th>
          </tr>
        </thead>
        <tbody>
          <tr>
            <td align="left">0</td>
            <td align="left">anonymous</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">1</td>
            <td align="left">rsa</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">2</td>
            <td align="left">dsa</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">3</td>
            <td align="left">ecdsa</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">7</td>
            <td align="left">ed25519</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">8</td>
            <td align="left">ed448</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">64</td>
            <td align="left">gostr34102012_256</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">65</td>
            <td align="left">gostr34102012_512</td>
            <td align="right">N</td>
          </tr>
        </tbody>
      </table>
      <ul spacing="normal">
        <li>
          <t>Added a note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-clientcertificatetype-identifiers-registry">
      <name>TLS ClientCertificateType Identifiers Registry</name>
      <t>TLS 1.0 and TLS 1.1 were deprecated <xref target="RFC8996"/>, TLS 1.2 will
be in use for some time. In order to reflect the changes in the "Recommended"
column allocation, IANA has updated the "TLS ClientCertificateType Identifiers"
registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Updated the registration procedure to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D"  in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Updated the "TLS ClientCertificateType Identifiers" registry to add a "Recommended"
column as follows:</t>
        </li>
      </ul>
      <table>
        <thead>
          <tr>
            <th align="left">Value</th>
            <th align="left">Description</th>
            <th align="right">Recommended</th>
          </tr>
        </thead>
        <tbody>
          <tr>
            <td align="left">1</td>
            <td align="left">rsa_sign</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">2</td>
            <td align="left">dss_sign</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">3</td>
            <td align="left">rsa_fixed_dh</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">4</td>
            <td align="left">dss_fixed_dh</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">5</td>
            <td align="left">rsa_ephemeral_dh_RESERVED</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">6</td>
            <td align="left">dss_ephemeral_dh_RESERVED</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">20</td>
            <td align="left">fortezza_dms_RESERVED</td>
            <td align="right">D</td>
          </tr>
          <tr>
            <td align="left">64</td>
            <td align="left">ecdsa_sign</td>
            <td align="right">Y</td>
          </tr>
          <tr>
            <td align="left">65</td>
            <td align="left">rsa_fixed_ecdh</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">66</td>
            <td align="left">ecdsa_fixed_ecdh</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">67</td>
            <td align="left">gost_sign256</td>
            <td align="right">N</td>
          </tr>
          <tr>
            <td align="left">68</td>
            <td align="left">gost_sign512</td>
            <td align="right">N</td>
          </tr>
        </tbody>
      </table>
      <ul spacing="normal">
        <li>
          <t>Added a note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-pskkeyexchangemode-registry">
      <name>TLS PskKeyExchangeMode Registry</name>
      <t>In order to reflect the changes in the "Recommended" column allocation,
IANA has updated the "TLS PskKeyExchangeMode" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Updated the registration procedure to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D"  in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Entries kept their existing "Recommended" column "Y" and "N" entries.</t>
        </li>
        <li>
          <t>Updated note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="tls-signaturescheme-registry">
      <name>TLS SignatureScheme Registry</name>
      <t>In order to reflect the changes in the "Recommended" column allocation,
IANA has updated the "TLS SignatureScheme" registry as follows:</t>
      <ul spacing="normal">
        <li>
          <t>Updated the registration procedure to include:  </t>
          <t>
Setting a value to "Y" or "D" or transitioning the value from
  "Y" or "D"  in the "Recommended" column requires
  IETF Standards Action with Expert Review or IESG Approval <xref target="RFC8126"/>.</t>
        </li>
        <li>
          <t>Added a reference to this document under the reference heading.</t>
        </li>
        <li>
          <t>Entries kept their existing "Recommended" column "Y" and "N" entries.</t>
        </li>
        <li>
          <t>Updated note on the "Recommended" column with text in <xref target="rec-note"/>.</t>
        </li>
      </ul>
    </section>
    <section anchor="adding-comment-column">
      <name>Adding "Comment" Column</name>
      <t>IANA has added a "Comment" column to the following registries:</t>
      <ul spacing="normal">
        <li>
          <t>TLS ExtensionType Values</t>
        </li>
        <li>
          <t>TLS Application-Layer Protocol Negotiation (ALPN) Protocol IDs</t>
        </li>
        <li>
          <t>TLS CachedInformationType Values</t>
        </li>
        <li>
          <t>TLS Certificate Compression Algorithm IDs</t>
        </li>
        <li>
          <t>TLS ClientCertificateType Identifiers</t>
        </li>
        <li>
          <t>TLS Cipher Suites</t>
        </li>
        <li>
          <t>TLS ContentType</t>
        </li>
        <li>
          <t>TLS EC Point Formats</t>
        </li>
        <li>
          <t>TLS EC Curve Types</t>
        </li>
        <li>
          <t>TLS Supplemental Data Formats (SupplementalDataType)</t>
        </li>
        <li>
          <t>TLS UserMappingType Values</t>
        </li>
        <li>
          <t>TLS SignatureAlgorithm</t>
        </li>
        <li>
          <t>TLS HashAlgorithm</t>
        </li>
        <li>
          <t>TLS Authorization Data Formats</t>
        </li>
        <li>
          <t>TLS Heartbeat Message Types</t>
        </li>
        <li>
          <t>TLS Heartbeat Modes</t>
        </li>
        <li>
          <t>TLS SignatureScheme</t>
        </li>
        <li>
          <t>TLS PskKeyExchangeMode</t>
        </li>
        <li>
          <t>TLS KDF Identifiers</t>
        </li>
        <li>
          <t>TLS SSLKEYLOGFILE Labels</t>
        </li>
      </ul>
      <t>This list of registries is all registries that do not already have a
"Comment" or "Note" column or that were not orphaned by TLS 1.3.</t>
    </section>
    <section anchor="expert-review-of-current-and-potential-ietf-and-irtf-documents">
      <name>Expert Review of Current and Potential IETF and IRTF Documents</name>
      <t>The intent of the Specification Required choice for TLS codepoints
is to allow for easy registration for codepoints associated with
protocols and algorithms that are not being actively developed inside
the IETF or IRTF. When TLS-based technologies are being developed inside
the IETF or IRTF, they should be done in coordination with the TLS WG in
order to provide appropriate review. For this reason, unless the TLS WG
Chairs indicate otherwise via email, designated
experts should decline codepoint registrations for documents that
have already been adopted or are being proposed for adoption by IETF
working groups or IRTF research groups.</t>
    </section>
    <section anchor="registration-requests">
      <name>Registration Requests</name>
      <t>Registration requests <bcp14>MUST</bcp14> be submitted in one of two ways:</t>
      <ol spacing="normal" type="1"><li>
          <t>By sending email to iana@iana.org; this email <bcp14>SHOULD</bcp14>
use an appropriate subject (e.g., "Request to register value in TLS
bar registry").</t>
        </li>
        <li>
          <t>Using the online form at <eref target="https://www.iana.org/form/protocol-assignment"/>.</t>
        </li>
      </ol>
      <t>Specification Required <xref target="RFC8126"/> registry requests are registered after
a three-week review period on the advice of one or more designated
experts. However, to allow for the allocation of values prior to
publication, the designated experts may approve registration once they
are satisfied that such a specification will be published.</t>
    </section>
    <section anchor="security-considerations">
      <name>Security Considerations</name>
      <t>Recommended algorithms are regarded as secure for general use at the
time of registration; however, cryptographic algorithms and parameters
will be broken or weakened over time.  It is possible that the
"Recommended" status in the registry lags behind the most recent advances
in cryptanalysis.  Implementers and users need to check that the
cryptographic algorithms listed continue to provide the expected level
of security.</t>
      <t>Designated experts ensure the specification is publicly available.  They may
provide more in-depth reviews.  Their review should not be taken as an
endorsement of the cipher suite, extension, supported group, etc.</t>
    </section>
    <section anchor="iana-considerations">
      <name>IANA Considerations</name>
      <t>This document is entirely about changes to TLS-related IANA registries.</t>
    </section>
  </middle>
  <back>
    <references anchor="sec-normative-references">
      <name>Normative References</name>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8447.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.2119.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8174.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8126.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.4346.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.7465.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.5469.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.9155.xml"/>
      <xi:include href="https://bib.ietf.org/public/rfc/bibxml/reference.RFC.8996.xml"/>
    </references>
  </back>
</rfc>
